Yamaha MOTIF6 Owner's Manual page 41

● In the Song/Pattern mode:
The diagram below indicates the connection when the Vocal Harmony Plug-in Board (PLG100-VH) is installed to
slot 1 and the Multi part Plug-in Board (PLG-100XG) is installed to slot 3.
Tone Generator
block
Part 1~16
*
Part 17-32
(When the Multi-part Plug-
in board has been installed)
Plug-in Part 2
(When the Single part Plug-
in board has been installed)
Select the part to which
the Plug-in Insertion
effect is applied.
* Please note that the Insertion Effect, Insertion Effect (Plug-in), and the System Effect cannot cannot be applied to
parts 17~32 (using the Multi-part Plug-in board). The signal from parts 17~32 is directly sent to the Master
Equalizer.
n The Vocal Harmony Plug-in Board (PLG100-VH) can be installed only to slot 1. It cannot be installed to slot 2 or 3.
n The Multi part Plug-in Board (PLG100-XG) can be installed only to slot 3. It cannot be installed to slot 1 or 2.
Select the part to which the Insertion
effect is applied. The connection type
depends on the setting of the Voice
assigned to the selected part.
Insertion Effect
1
2
Insertion Effect
(Plug-in)
PLG100-VH
A/D Input
• External audio source
• Microphone sound
System Effect
Reverb
Chorus
Variation
Return Level
Send Level
Master Equalizer
System Overview
Reference (page 210)
Output
41
MOTIF Basic Structure