Sampling Job mode
● [F1]-06 Time-Stretch
This Job lets you change the length of the sample
without changing the pitch.
Set the Waveform and Key Bank containing the
sample to be time-stretched.
Press the [ENTER] button to
execute the Job.
Press the [F5] (CANCEL) button to
cancel the operation.
Press the [F6] (OK) button to assign the
time-stretched sample to the specified
Key Bank.
Press the [ENTER] button to execute the
operation. If you're not satisfied with the
results, change the Ratio and Accuracy
values and press the [ENTER]
button again. This automatically reverts back
to the original settings and executes the
operation again with the new settings.
• Ratio
Determines the length of post-process sample as a ratio of
the length of the original sample (100%). Lower values
compress the sample, while higher values expand the
sample.
❏ Settings
25~400%
• Accuracy
Determines the quality of the resulting sample by
specifying which aspect of the original is to be emphasized:
sound quality or rhythmic feel.
❏ Settings
25~400%
Sound4-Sound1
These settings place emphasis on sound quality, with the
“SOUND 4” setting producing the highest sound quality.
Normal
Produces an optimum balance of sound quality and
rhythmic feel.
Rhythm1-Rhythm 2
These settings place emphasis on rhythmic feel, with the
“Rhythm 2” setting producing the most accurate rhythmic
feel.
244
MOTIF Reference