Saving And Recalling Your Original Settings As A Single File - Yamaha PSR-1500 Service Manual

PSR-1500/PSR-3000
3
Checkmark the box of the item to be reset to the factory programmed settings by pressing the
[4 ] button.
4
Press the [D] button to execute the Factory Reset operation for all checkmarked items.

Saving and Recalling Your Original Settings as a Single File

For the items below, you can save your Original Settings as a Single File for future recall.
1
Make all desired settings on the instrument.
2
Call up the operation display.
[FUNCTION]
3
Press one of the [F]–[I] buttons to call up the relevant display for saving your data.
SYSTEM SETUP
MIDI SETUP
USER EFFECT
MUSIC FINDER
4
Select one of the tabs (other than the PRESET) by pressing the TAB [
Note that the file in the PRESET tab display is the file of factory-programmed settings. If you select it, the factory-
programmed settings for the respective item will be restored. (This is the same results as on page 67 "Restoring the
Factory-programmed Settings Independently by Item.")
5
Save your file (page 66).
6
To recall your file, select the tab and page to which you've saved the file (same tab and page as
specified in step 4), and press the corresponding [A]–[J] button.
68
[I] UTILITY TAB[ ] SYSTEM RESET
Parameters set on the various displays such as the [FUNCTION]
setting display are handled as a single System Setup file. Refer to the separate Data List
booklet for details on which parameters belong to the System Setup.
The MIDI settings including the MIDI templates on the User tab display are handled as a single
file.
The User Effect settings including the user effect types, user master EQ types, and user vocal
harmony types (PSR-3000) created via the Mixing Console displays are managed as a single
file.
All the preset and created records of the Music Finder are handled as a single file.
UTILITY and microphone
][ ] buttons.