Important - Please Read; Tools Needed For Assembly - Tree Frogs PARROT ISLAND Manual

As fresh lumber acclimates to its new environment, the
natural tendencies of the tree can show itself in the form of
checks, or "cracks" in the lumber. In almost all cases this is
normal and it will not affect the structural integrity of your play
set.
Cosmetic defects that do not affect the structural integrity
of the product, or natural defects of wood such as warping,
checking or any other physical properties of wood that do not
present a safety hazard, are not covered by this warranty.
Defects that develop because the product is exposed to
extreme climate conditions are not covered by this warranty.
Defects that develop as a result of faulty or improper installation
of the product are also not covered by this warranty.
Most cracks are not warrantable, however if you believe
that the integrity of your play set is compromised by this natural
occurrence, please contact the Tree Frogs Swing Set Dealer that
you purchased your swing set from.
We appreciate your purchase and know that you will enjoy
your play system for many years to come.
Tape Measure
Phillips Screw Driver
Claw Hammer or Rubber Mallet
9/16" Deep Well Socket
Phillips Head Screw Bits
Please familiarize yourself with the install manual, parts/components and general construction process of your new swing set before
getting started. Approximate assembly time: 6 to 8 hours. 6 foot unobstructed safety perimeter around swingset recommended.

IMPORTANT - PLEASE READ

Tools Needed for Assembly

24" Level
3/8" Cordless Drill or Electric Drill
Pliers or Vise Grips
3/4" Deep Well Socket
An Adult with two Adult Helpers
Angle Square
3/8" Drive Ratchet or Electric Impact Gun
7/16" Deep Well Socket
1/8", 1/4", and 9/16" Drill Bits