Bender COMTRAXX CP9 Series Manual page 21

Customised alarm indicator and operator panel for medical locations and other areas

Hide thumbs Also See for COMTRAXX CP9 Series:

Table of Contents

! Damage/Failure due to fluid ingress!

aution

If the seal of the front plate is not positioned evenly in the bezel frame, cleaning fluids may en-

ter the alarm indicator and operator panel, damage the electronics and thereby cause a failure

of the panel. Make sure that the seal is installed evenly in the frame.

Front plate, 3 mm, Aluminium

Threaded bolt,

M3x6mm, with cap nut

Catch spring, 12.5 mm

Spring steel C75 - H&H

Fig. 3–1 Cross section view

CP9xx-x_D00406_00_M_XXEN/04.2020

COMTRAXX® CP9xx-x – Control Panel

Table of Contents