Motorola LXN 500 Installation, Configuration And Operations Manual page 37

Command Line Option
Client/Server
-u, --udp
-p, --port <Port>
-B, --bind <Interface>
Server Specific
-s, --server
-t
-a
-n count
-l size
-f
-i TTL
-v TOS
-r count
-s count
-j host-list
-k host-list
-w timeout
-R
-S srcaddr
-4
-6
Start the i Perf application on the mobile device.
4.
Click the Start new test button and wait for the results to appear in the Result window.
5.
Result: The test results is displayed in the Result window. The output contains a time-stamped
report of the amount of data transferred and the throughput measured.
Click Get Log to display the results of the last test or Clear Log to remove the lo
6.
Send Feedback
Description
Uses UDP instead of TCP.
Connects with or expects data packets on this port (default: 5001).
Permits the connection only via the specified interface (IP address or
interface name).
Starts iPerf in server mode and waits for an iPerf client to contact it.
Ping the specified host until stopped.
To see statistics and continue - type Control-Break;
•
To stop - type Control-C.
•
Resolve addresses to hostnames
Number of echo requests to send.
Send buffer size.
Set Don't Fragment flag in packet (IPv4-only).
Time To Live.
Type Of Service (IPv4-only).
Record route for count hops (IPv4-only).
Timestamp for count hops (IPv4-only).
Loose source route along host-list (IPv4-only).
Strict source route along host-list (IPv4-only).
Timeout in milliseconds to wait for each reply.
Trace round-trip path (IPv6-only).
Source address to use (IPv6-only).
Force using IPv4.
Force using IPv6.
MN003563A01-B
Operation and Configuration
37