Setting The Enodeb; Enodeb Screen; Enodeb Band Configuration - Motorola LXN 500 Installation, Configuration And Operations Manual

MN003563A01-B
Operation and Configuration

Setting the eNodeB

The eNodeB is the part of the LXN 500 that sends and receives radio transmissions and signaling from
and to the mobile devices. The eNodeB process the LTE analogue and digital over-the-air interface
signals.
Perform this procedure to configure the eNodeB.
Procedure:
Sign in to the LXN 500 O&M Configuration site (See
1.
Click the eNodeB tab.
2.
Result: The eNodeB screen is displayed.

eNodeB Screen

Figure 2-11
In the Bandwidth field, select the required bandwidth.
3.

eNodeB Band Configuration

Table 2-3
Band
14
20
28
30
Bandwidth (MHz)
5, 10
5, 10, 20
5, 10, 20
Signing In on page
Uplink / Downlink Frequency Range
UL:788 - 798, DL: 758 - 768
UL: 832 - 862, DL: 791 - 821
UL: 723 - 748, DL: 778 - 803
20).
Send Feedback