Passwords; Default Password Assigned To Each User Role - Motorola LXN 500 Installation, Configuration And Operations Manual

Passwords

The LXN 500 requires a sign in password to monitor, configure, administrate and service the LXN 500.
Passwords are based on three type of user roles and are not granted on personal bases.
Each user role is initially assigned with a default password that can only be changed by an administrator.
To avoid a security breach, it is recommended to change passwords upon signing in for
IMPORTANT
the first time. Change passwords frequently and establish a security policy that
determines a maximum password duration.
Table 2-2 shows the default password assigned to each user role.

Default Password Assigned to Each User Role

Table 2-2
User Role
User
Password
Changing the User Password
Perform this procedure to change a password to a user role:
Procedure:
Log in as an Administrator.
1.
Click on
2.
Select the User
3.
and click Change.
When changing a password note that a valid password must comply with the following rules:
Use at least 15 characters in length password
•
Use at least one uppercase character
•
Use at least one lower-case character
•
Use at least one numeric character
•
Use at least one special character
•
When changing a password, change at least 8 of the total number of characters.
•
IMPORTANT
Send Feedback
Administrator
admin
M0t0r0laAdm1n1!
and select Change Password.
enter the old password
→
Changing a user role password does not effect other access permissions or
application passwords in the LXN 500.
Technician
tech
M0t0r0laT3ch12!
enter a new password
→
MN003563A01-B
Operation and Configuration
Operator
user
MotorolaLXN5001!
reconfirm the new password
→
23