Motorola LXN 500 Installation, Configuration And Operations Manual page 13

Features of LXN 500 Front Panel (Continued)
Table 1-1
Item
3 BAT1 Status LED of battery 1(Future option of the LXN 500).
NOTE
and release.
•
•
•
•
•
•
•
APP is a status LED used to diagnose and troubleshoot the LXN 500. Refer to
4 APP
Troubleshooting and Maintenance
The APP (Application Server) stores the applications used by the LXN 500. The optional
applications provided with the LXN 500 are the WAVE 5000 that enables full interoperability
between LTE and land mobile radio systems and the DragonForce software.
•
•
•
•
•
•
•
CORE is a status LED used to diagnose the CORE (Evolved Packet Core - EPC).
5 CORE
The CORE is a framework for providing converged of voice and data including HTTP web
server on a 4G LTE network. Refer to
shows orange or red color.
•
•
•
•
•
•
•
Send Feedback
To switch between active and standby battery, press the Power button for one second
LED OFF - No battery or battery is disconnected
GREEN - Battery is active and its capacity is more than 50%
BLINKING GREEN - Battery is in Standby and its capacity is more than 50%
ORANGE - Battery is active and its capacity is 10% to 50%
BLINK ORANGE - Battery is in Standby mode and its capacity is 10% to 50%
RED - Battery is active and its capacity is less than 10%
BLINKING RED - Battery is in Standby mode and its capacity is less than 10%
LED OFF - OFF
GREEN - All applications are running
BLINKING GREEN - Applications startup in progress
ORANGE - Not all applications are running. At least one application is down and one is
running
BLINKING ORANGE - Applications shutdown in progress
RED - Failure: All applications are down
BLINKING RED - Fatal Error: Cannot connect to application server
LED OFF - OFF
GREEN - All EPC processes are running and S1 (Communication between eNodeB
and EPC) is up
BLINKING GREEN - EPC startup in progress
ORANGE - One or more EPC processes are down and one or more are active or S1 is
down
BLINKING ORANGE - EPC shutdown in progress
RED - Failure. All EPC processes are down
BLINKING RED - Fatal error. Cannot connect to EPC
Description
whenever the LED shows orange or red color.
Troubleshooting and Maintenance
MN003563A01-B
Overview
whenever the LED
13