WiFi telemetry with BetaFlight/ INav
For the WiFi telemetry, you need to wire up your FC with a extra MAVLink connection, as the MAVLink
emulation is not (yet) supported by the WiFi firmware:
Settings in BetaFlight/ INav
On the port where you got your extra MAVLink connection installed, enable M AVLink w ith 5 7600Baud in
the P ORTS t ab for that UART.
Note: You need to cancel the "loading parameter" dialog in MissionPlanner etc, as it will not get past this
dialog. The important telemetry data will be sent anyway.
64