Receiver Led Status Indicator; Myvtx - Team Blacksheep CROSSFIRE Manual

Receiver LED status indicator
There are three (Standard Diversity RX) or two (any other receiver) LEDs on the receiver giving you an
indication of link- and backup-battery status.
Receiver LED indicators
Solid green ​
▀ ▀▀
Solid red ​
▀ ▀▀
Fast red blinking ​
■ ■ ■ ■
Slow green blinking ​
▀ ▀
Fast green blinking ​
■ ■ ■ ■
Green is flashing ​
█ █ █
Double green blinking ​
■ ■
Find mode is only available with the diversity receivers.
MyVTX
With the new MyVTX menu you can set all your VTx's to the same channel, band and output power without
accessing all of them. This is useful if you are on a race with multiple drones and have to set them all to
the same channel.
If you enable MyVtx, all other vtx settings will be overridden temporarily, till you disable it again.
Connect your vtx to the Crossfire Rx by CRSF or Smart Audio, activate MyVtx and set the it up*
Description
Link is up and running OK
No packages received from the transmitter and receiver is in
failsafe mode
Receiver needs a update, confirmation on the tx is required
Receiver is in binding mode
▀
Receiver bootloader active or firmware upgrade running
Diversity RX is in Find-mode (up to 1 min. delay between flashing)
Authentication error. Rebind your receiver - ​
■ ■
30
m ore details