Transmitter - Team Blacksheep CROSSFIRE Manual

Transmitter
First you need to set your transmitter in bind mode. For this you got a variety of options, depending on the
radio and transmitter type you use:
Lua script (OpenTX radio only):
1. Turn on your radio
2. Navigate to the Crossfire lua script and
execute it
3. Open the ​ C rossfire Transmitter
4. Scroll down to ​ B ind ​ a nd hit enter
Agent X:
1. Connect your transmitter to the Agent X by
USB
2. Open the Crossfire Transmitter (​ M anage​ )
3. Navigate to the ​ C onfigure ​ t ab
4. Under ​ D evice​ , click on ​ B ind
Oled Display (Standard/ Lite TX):
1. Hold the joystick down till the menu opens
up
2. Open the​ Crossfire Transmitter
3. Navigate to ​ G eneral
4. Scroll down to ​ B ind ​ a nd click on the
joystick
TBS Tango 1:
1. Turn on your radio
2. Hold the rocker switch to enter the main
menu
3. Scroll down to ​ D evices
4. Under​ Crossfire Transmitter
5. Click on ​ B ind
Button (Micro TX):
1. Power up the transmitter
2. Push the button of the Micro TX once
19