Change Language; Change Zero Suppression; Change Password - Prosense PQ Series Installation And User Manual

Change Language

The detector display language can be changed to English or Turkish. To change Language first
select Configure option on main menu then select Display option and Language option. Once
you reach to Language screen you will able to switch display language:
Menu Language
English

Change Zero Suppression

User can adjust the way showing measurement level around zero level. If zero suppression
mode set to NO, detector will display measurement as detected. If zero suppression mode set
to YES, detector will show measurement levels as 0 (zero) up to 3% LEL. At 3% LEL it will
display measurements as detected.
.
Zero Suppression
NO
To change zero suppression mode select Zero Suppression option on Display menu and pres
Enter key. Current zero suppression mode will be displayed. If needed change the value via
using up and down keys. Once adjusted press Enter key to record value.

Change password

User can change password. The default password is 1234. To change password select
Password menu item via using up and down keys and press Enter key. Display will ask new
password:
New Password
0
Password must be 4 digits and should be set digit by digit via using up and down keys. When
completed, press Enter key long enough to confirm. The display will show "Successful"
message and return back to higher level menu. User should remember the password to
perform changes later on. If user forgets the password, detector should be returned back to
PRS-UM-PQ-EN-Rev.05-18.06.2020 31