Test Menu Options; Run Inhibit Test - Prosense PQ Series Installation And User Manual

Test Menu Options

User can execute tests to check detectors functions. Test menu structure is given in below
diagram:
To perform tests select Test menu item via up and down keys then press Enter key. The screen
will display test options:
To execute tests select desired test option and press Enter key. To return back to previous

Run Inhibit test

menu please select Previous Menu option and press Enter key.
User can initiate detector to work in inhibited mode. In this mode detector will provide the
signal level defined in configuration details for inhibited mode (default is 3mA) and the alarms
will be deactivated. When Inhibit option selected in Test menu below screen will display to set
inhibit detector:
PRS-UM-PQ-EN-Rev.05-18.06.2020
Diagram17: Test menu structure
1. Inhibit
2. Display
3. Relay
4. Analog Output
5. Bump Test
6. Previous Menu
1. Set
2. Previous Menu
36