Change Test Interval; Adjust Inhibit Warning - Prosense PQ Series Installation And User Manual

Change Test Interval

To change bump test interval select Test Interval option on Bump Test Menu.
Once the bump test interval menu shown the time value will start blinking. User can change
the value via using up and down keys. Select Enter key to save the value when adjustment
done. The display will show "Successful" message and return back to previous menu.

Adjust Inhibit warning

User can set or clear inhibit warning via using Inhibit warning option on Bump Test Menu. To
adjust warning please select Inhibit warning menu option. A new menu shown including
possible adjustment option:
If inhibit warning already set, the screen will display clear option:
Once decided select the option and press Enter key. The display will show "Successful"
message and return back to previous menu.
PRS-UM-PQ-EN-Rev.05-18.06.2020
Bump Test Interval
3 Month
1. Set
2. Previous Menu
1. Clear
2. Previous Menu
33