Detector Body - Prosense PQ Series Installation And User Manual

Detector body

The detector enclosure has four threaded entries. The two cable entries either side of the
upper part of the transmitter housing are for connecting the power source, signal output and
relay contacts to associated signalling equipment. The bottom entry allows direct connection
of the sensor socket. There are two mounting holes incorporated into the transmitter
housing.
Detector body has four entries and depending of the type selection their size and type will
be different. The type information can be easily checked from the label as it mentioned with
T code. For example PQD-3135 T1 means the detector body uses TYPE 1 body. The entries
shown in Diagram-4:
PRS-UM-PQ-EN-Rev.05-18.06.2020
Diagram 3: Detector body and Sensor Head
Entry 1
Entry 4
Diagram 4: Detector body cable entries
Entry 2
Entry 3
11