Configure; Change Date And Time - Prosense PQ Series Installation And User Manual

Configure

User can change the parameters of detector depending of the usage such as date, time,
password and detector address via configure menu. Select 'Configure' step on main menu to
perform changes. A new menu options will display with options:
The Configure menu structure is given in below diagram:

Change date and time

To change date and time select first menu item. Display will show date and time details:
PRS-UM-PQ-EN-Rev.05-18.06.2020
1. Date and Time
2. Modbus Address
3. Analog Output
4. Display
5. Bump Test
6. Previous Menu
Diagram15: Configure menu structure
Date and Time
YY/MM/DD HH/MM/SS
18/03/27 15/38/27
29