Procedure For Setting Data (7-Segment Keypad) - LG SV008iS5-2 Manual

2.3.2

Procedure for Setting Data (7-Segment Keypad)

In DRV Group:
1. Rotate the encoder knob until the desired parameter code is displayed.
Press PROG/ENT key to go into the programming mode, then the display blinks.
2.
Press SHIFT/ESC key to move the cursor to the desired digit.
3.
4. Rotate the encoder knob to change the data.
Press PROG/ENT key to enter the changed data.
5.
In FUN1 Group:
1. Rotate the encoder knob until parameter code '20' is displayed in drive group.
Press PROG/ENT key to go into the FUN1 group.
2.
3. Rotate the encoder knob until the desired parameter code is displayed.
Press PROG/ENT key to go into the programming mode, then the display blinks.
4.
Press SHIFT/ESC key to move the cursor to the desired digit.
5.
6. Rotate the encoder knob to change the data.
Press PROG/ENT key to enter the changed data.
7.
In FUN2 Group:
1. Rotate the encoder knob until parameter code '21' is displayed in drive group.
2. Go to step 2 of 'In FUN1 Group' above, and follow the rest procedure.
In I/O Group:
1. Rotate the encoder knob until parameter code '22' is displayed in drive group.
2. Go to step 2 of 'In FUN1 Group' above, and follow the rest procedure.
23
Chapter 2 - Operation