I The Indoor Unit Address Setting Method; Multi-V Plus & Mps Product - LG PC Central Controller Installation Manual

The Indoor Unit Address Setting method
The Indoor Unit Address Setting method
Multi-V PLUS & MPS Product
I Using wired remote controller
Program
1. Press [Program & Set/Clr keys] at the same time.
2. Set the indoor unit address using the temperature controller.
Allowed Range : 00-FF (16 digits hexa decimal numbering.)
3
EX)
Group No. Indoor Unit No.
3. Complete the address setting by pressing the week Program & Set/Clr keys again at the same time
for 3 seconds. Now the address is stored in the system.
❈ Some remote controllers may not be suported by above functions, a coording to the production date
of wired/wireless remote conrollers. As it has no concem with customers' use, use the remote
controller available for the address setting during installation.
12 PC Central Controller
AUTO SWING OPERATION
Timer Operation unit
On Off
Set no. Time 01 03 05
Timer Cancel
Program Week Holiday
Set/Clr
Hour Min
Set/Ctl
A
SET TEMP FAN SPEED SUB FUNCTION
Room Temp
HI AUTO Heater
MED Defrost
JET
LO Filter
Time ZONE
Program set
07 09 11 13 15 17 19
Plasma
RESET
Preheat
Humidify
Out door
1 2 3 4
21 23