Fig. 6 Power Contact On Left Side - Beckhoff KL3208-0010 Documentation

Eight channel input terminals for pt1000, ni1000, ntc

Table of Contents

Fig. 6: Power contact on left side

Possible damage of the device

Note that, for reasons of electromagnetic compatibility, the PE contacts are capacitatively coupled to the

mounting rail. This may lead to incorrect results during insulation testing or to damage on the terminal (e.g.

disruptive discharge to the PE line during insulation testing of a consumer with a nominal voltage of 230 V).

For insulation testing, disconnect the PE supply line at the Bus Coupler or the Power Feed Terminal! In or-

der to decouple further feed points for testing, these Power Feed Terminals can be released and pulled at

least 10 mm from the group of terminals.

Risk of electric shock!

The PE power contact must not be used for other potentials!

KL3208-0010, KL3228-0000,

KS3228-0000

NOTE

WARNING

Version: 3.1.0

Mounting and wiring

Table of Contents

Chapters

Table of Contents

Kl3228-0000 Ks3228-0000