Chapter 5 Appendix
5.1 When the Display Unit type cannot be changed,
Depending on a project file's function setting, the following message may appear and
the Display Unit may not be able to be changed to GP-4301TM.
[Cause]
- Logic settings are made.->
- L system variables are used.->
- I/O Settings are made.->
- Unsupported variables are registered in Symbol Variable Setting.->
- In Logic Programs Setting, [Address Format] is selected.->
[Cause]
- In Device/PLC Setting, multiple communication drivers are registered.
->
Solution (2)-1
- A communication driver that is not supported is set.->
- The function using the unsupported port (COM2) is set. ->
Solution (1)-1
Solution (1)-2
Solution (1)-3
37/40
Solution (1)-4
Solution (1)-5
Solution (2)-2
Solution (2)-3