Pro-face GP3000 Series Hardware Manual
  1. Manuals
  2. Brands
  3. Pro-face Manuals
  4. Industrial Monitor
  5. GP3000 Series
  6. Hardware manual
Pro-face GP3000 Series Hardware Manual

Pro-face GP3000 Series Hardware Manual

Hide thumbs Also See for GP3000 Series:
Table of Contents

Advertisement

Quick Links

Download this manual
Thank you for purchasing the Pro-face GP3000 series RGB Input Unit, "GP3000-
RGB201" (hereafter referred to as the "RGB unit").
This unit is intended for use with the expansion unit interface of the Pro-face
*1
GP3000 series
"Display unit"), and as a RGB input interface with any of the above mentioned
Display units.
Before using the RGB unit, please be sure to read this manual and other related
manuals to fully understand all the settings and functions.
*1
For the compatible models, please refer to the following.
Applicable Products (page 5)
SEE
NOTICE
1. Copying this manual's contents, either in whole or in part, is prohibited
without the express permission of Digital Electronics Corporation, Japan.
2. The information contained in this manual is subject to change without notice.
3. If you find any errors or omissions in this document, please contact Digital
Electronics Corporation to report your findings.
4. Please be aware that Digital Electronics Corporation shall not be held liable
by the user for any damages, losses, or third party claims arising from the
uses of this product.
© 2009 Digital Electronics Corporation. All rights reserved.
Product names used in this manual are the trademarks / registered trademarks of
their respective owners.
programmable operator interface (hereafter referred to as the

Preface

1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the GP3000 Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Pro-face GP3000 Series

Summary of Contents for Pro-face GP3000 Series

  • Page 1: Preface

    Thank you for purchasing the Pro-face GP3000 series RGB Input Unit, “GP3000- RGB201” (hereafter referred to as the “RGB unit”). This unit is intended for use with the expansion unit interface of the Pro-face GP3000 series programmable operator interface (hereafter referred to as the “Display unit”), and as a RGB input interface with any of the above mentioned...

  • Page 2: Essential Safety Precautions

    Essential Safety Precautions All safety-related procedures stated in this document must be followed to operate the RGB unit correctly and safely. Be sure to read this manual and any related documents thoroughly to understand the correct operation and functions of the RGB unit.
  • Page 3 Avoid storing or operating the RGB unit in locations where it will be exposed to direct sunlight, high temperature, excessive dust, or vibration. Avoid storing or operating the RGB unit in locations where large and sudden temperature changes can occur, possibly causing condensation. Do not store or operate the RGB unit where chemicals can evaporate, be present in the air and adhere to the unit.

  • Page 4: Information Symbols

    Be sure to follow these procedures in the order they are written. Indicates the description of footnote in the text. Indicates pages containing related information or related manuals. GP-Pro EX Indicates the Screen editor software for the Pro-face GP3000 series. Package Contents Hardware Manual <This Manual> (1) RGB unit (1)

  • Page 5: Applicable Products

    Applicable Software GP3000 Series GP-Pro EX Ver. 2.50 or later • For GP3000 Series, GP-Pro EX Ver. 2.50 or later is required to utilize the RGB unit. If you are currently using an earlier version of the above software, you will need to upgrade it. For more information, please contact your local Pro-face distributor.

  • Page 6: Ul/C-Ul Approval

    UL/c-UL Approval The RGB unit "GP3000-RGB201" is a UL/c-UL product, listed on UL File No.E220851 and UL File No.E210412. The RGB unit "GP3000-RGB201" is a UL/c-UL product, recognized on UL File No.E171486 and UL File No.E231702. Product Model No. UL/c-UL Registration Model No. GP3000-RGB201 3710013-01 The RGB unit "GP3000-RGB201"...

  • Page 7: Ce Marking

    • WARNING: Explosion hazard - when in hazardous locations, turn off power before replacing or wiring modules. • WARNING: Explosion hazard - do not disconnect equipment unless power has been switched off or the area is known to be non-hazardous. CE Marking The RGB unit “GP3000-RGB201”...

  • Page 9: Table Of Contents

    Table of Contents Preface ....................1 Essential Safety Precautions..............2 Information Symbols................4 Package Contents .................. 4 Applicable Products................. 5 Inquiry...................... 5 UL/c-UL Approval ..................6 CE Marking....................7 Table of Contents ..................9 Chapter 1 Overview Operating the RGB Unit............. 11 System Configuration ..............
  • Page 10 3.2.1 RGB Cable Connection ............27 3.2.2 USB Cable Connection ............27 Chapter 4 Setup RGB IN0/1 Display Adjustment ..........31 Setup Mouse Emulation ............31...

  • Page 11: Chapter 1 Overview

    GP3000 Series RGB Input Unit Hardware Manual Chapter 1 Overview 1.1 Operating the RGB Unit The RGB unit features the following functions: • Maximum of 2 screens can be displayed on the Display unit among 2 PC image (RGB) inputs.

  • Page 12: Part Names And Functions

    Reserved (always ON) Side • When performing mouse emulation, be aware of the following items. • Download the mouse emulation software (UPDD) from Pro-face website, "OtasukePro!" and install. http://www.pro-face.com/otasuke/ • Connect to PC using USB0 and RGB0 or USB1 and RGB1 combination.

  • Page 13: Unbundled Items

    Depending on your software version, it is necessary to download the latest module and install the additional programs. For details, please access Pro-face's website "OtasukePro!" for product support. http://www.pro-face.com/otasuke/ Refer to the “GP-Pro EX Reference Manual” for details on display settings...
  • Page 14 Chapter 1 Overview...

  • Page 15: Chapter 2 Specifications

    GP3000 Series RGB Input Unit Hardware Manual Chapter 2 Specifications 2.1 General Specifications 2.1.1 Electrical Items Specifications ± Rated Voltage DC5V 5% (supplied by the Display unit) Power Power Supply DC5V 0.8A (max.) Consumption DC type Display unit: AC1000V 20mA for 1 minute...

  • Page 16: Structural

    Chapter 2 Specifications Items Specifications IEC61131-2 compliant Vibration 5 to 9Hz single-amplitude 3.5mm [0.14 in.] Resistance 9 to 150Hz constant-accelerated velocity 9.8m/s X,Y,Z directions for 10 cycles (100 minutes) IEC61131-2 compliant Concussion Resistance (147m/s X, Y, Z directions for 3 times) Noise Voltage: 1000V (Display unit: DC type) 1500V...

  • Page 17: Performance Specifications

    GP3000 Series RGB Input Unit Hardware Manual 2.2 Performance Specifications 2.2.1 Performance Specifications RGB Input (RGB IN0/1) Items Specifications Remarks VESA standard Signal System Analog RGB, separated Maximum Varies depending on 5m or less is recommended Transmission the performance of the Distance PC connected.
  • Page 18 Chapter 2 Specifications PC Signal Input Screen Mode Horizontal Vertical H. Sync. V. Sync. Dot Clock Mode Resolution Resolution (kHz) (Hz) (MHz) 31.469 59.940 25.175 37.861 72.809 31.500 37.500 75.000 31.500 43.269 85.008 36.000 35.156 56.250 36.000 37.879 60.317 40.000 SVGA 48.077 72.188...

  • Page 19: Interface Specifications

    To prevent possible equipment malfunction, do not disconnect the cable while the equipment is turned ON. • If a cable other than the specified Pro-face RGB cable is used, the product performance cannot be guaranteed against possible noise or signal degradation.
  • Page 20 To prevent possible equipment malfunction, do not disconnect the cable while the equipment is turned ON. • If a cable other than the specified Pro-face USB cable is used, the product performance cannot be guaranteed against possible noise or signal degradation.

  • Page 21: External View And Dimensions

    GP3000 Series RGB Input Unit Hardware Manual 2.3 External View and Dimensions 2.3.1 External View Unit: mm [in.] Top view 36 [1.42] 110 [4.33] [1.06] 99 [3.90] Side view (right) Rear view Side view (left) Bottom view...

  • Page 22: Gp-3500 Series External View With The Rgb Unit

    Chapter 2 Specifications 2.3.2 GP-3500 Series External View with the RGB Unit Unit: mm [in.] [1.06] [0.12] 62 [2.44] • When you design the system, be sure to consider the cable material and the lead-out direction so that no excessive force is applied to the connector.

  • Page 23: Gp-3600 Series External View With The Rgb Unit

    GP3000 Series RGB Input Unit Hardware Manual 2.3.3 GP-3600 Series External View with the RGB Unit Unit: mm [in.] 56 [2.20] [1.06] [0.12] • When you design the system, be sure to consider the cable material and the lead-out direction so that no excessive force is applied to the connector.

  • Page 24: Gp-3700 Series External View With The Rgb Unit

    Chapter 2 Specifications 2.3.4 GP-3700 Series External View with the RGB Unit Unit: mm [in.] [0.12] [1.06] 17 [0.67] • When you design the system, be sure to consider the cable material and the lead-out direction so that no excessive force is applied to the connector.

  • Page 25: Chapter 3 Installation

    GP3000 Series RGB Input Unit Hardware Manual Chapter 3 Installation 3.1 Installing the RGB Unit To prevent an electric shock, before installation be sure to check that the Display unit’s power cord is not plugged in to a power supply.
  • Page 26 Chapter 3 Installation (3) Fix the RGB unit with the four screws supplied. (Tightening torque: 0.5 to 0.6 N•m) • The Expansion Unit Interface 1 (EXT1) cannot be installed in the expansion unit when the RGB unit is installed in the AGP-35*0T.

  • Page 27: Wiring For Rgb And Usb Cable

    GP3000 Series RGB Input Unit Hardware Manual 3.2 Wiring for RGB and USB Cable 3.2.1 RGB Cable Connection (1) Make sure that power is not supplied to the Display unit and the PC. (2) Connect the RGB cable with the RGB IN0 or RGB IN1. The connector needs to be secured with a screw.
  • Page 28 Chapter 3 Installation (2) Insert the tab on the side of the USB holder into the RGB unit front slit on the USB cable side. (3) Lower the USB holder so as to face the USB cable. Pass the USB cable through the USB holder guide.
  • Page 29 GP3000 Series RGB Input Unit Hardware Manual Removing the USB Cable Holder Use step 2, 3, and 4 of the “Installing the USB cable holder” procedure in reverse order to remove the USB cable holder and disconnect the USB cable.
  • Page 30 Chapter 3 Installation...
  • Page 31 GP3000 Series RGB Input Unit Hardware Manual Chapter 4 Setup 4.1 RGB IN0/1 Display Adjustment When the image input into the RGB IN0 port is RGB IN1, the Display unit‘s position, screen and color can be adjusted in Display unit.
  • Page 32 Chapter 4 Setup (3) The installed USB driver operates as a virtual COM port. Make sure that "GP3000-RBG20x" is added to [Port (COM and LPT)] of the Device Manager. Select the port number to which "GP3000-RGB20x" is assigned when installing UPDD. •...

This manual is also suitable for:

Gp3000- rgb201

Table of Contents