Receive Screen Data From Gp/St3000 Series - Pro-face GP3000 Series Replacement Manualbook

3.3 Receive screen data from GP/ST3000 series

This section explains, as an example, how to receive screen data from GP/ST3000
series using a transfer cable, CA3-USBCB-01. If you have backed up screen data, this
step is unnecessary; skip to the next section
(1) Connect a USB transfer cable to a unit of GP/ST3000 series.
(2) Make sure that the [Device] in the "Transfer Settings Information" is set to [USB].
If not, click the [Transfer Setting] button to open the "Transfer Setting" dialog box.
Select [USB] in the Communication Port Settings field and click [OK].
(3) Start GP-Pro EX Transfer Tool and click the [Receive Project] button.
[3.4 Change the Display Unit
21/40
type].