Preparation - Pro-face GP3000 Series Replacement Manualbook

3.2 Preparation

Requirements for
receiving screen data
from GP/ST3000
series *1
Requirements for
converting screen
data of GP/ST3000
series and
transferring them to
GP-4301TM
*1: This step is required if screen data is saved only in the display unit, not in any other device
*2: The software version must be the same as or higher than the version that you used when creating screen
data for GP/ST3000 series.
We recommend you upgrade to the latest version if you don't know the version you use. Upgrade it on our
website OtasukePro! (http://www.pro-face.com/otasuke/).
PC in which GP-Pro EX Transfer Tool is installed
A USB data-transfer cable (model: CA3-USBCB-01)
*GP/ST3000 series also allows you to transfer screen data
with a CF card/USB flash drive, or Ethernet.
PC in which GP-Pro EX Ver.2.71 or later is installed.
A USB datda-transfer cable (model: ZC9USCBMB1) or
A commercial USB cable (USB A/mini-B)
* GP-4301TM also allows you to transfer screen data via USB
flash drive or on Ethernet.
20/40
*2