NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your
inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Topics:
•
Procedure
•
Post-requisites
Procedure
1. Align the sensor board on the display-back cover and snap the sensor board into place.
2. Slide the sensor-board cable into the slot on the sensor board and press down the latch to secure the cable.
Post-requisites
1. Replace the
display
panel.
2. Replace the
display
assembly.
3. Replace the
wireless
card.
4. Replace the battery.
5. Replace the
base
cover.
74
Replacing the sensor board
Replacing the sensor board
computer. After working inside your computer, follow the instructions in
40
After working
www.dell.com/