Replacing The Sensor Board; Procedure; Post-Requisites - Dell Inspiron 17 7000 Series Service Manual

Replacing the sensor board

WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your
computer, follow the instructions in
computer. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.

Procedure

1 Align the sensor board on the display-panel assembly and snap the
sensor board in place.
2 Slide the sensor-board cable into the connector on sensor board and
press down the latch to secure the cable.
3 Adhere the tape that secures the sensor-board cable to the sensor board.
4 Replace the screw that secures the sensor board to the display-panel
assembly.

Post-requisites

1 Follow the procedure from step 6 to step 8 in
panel".
2 Replace the display
3 Replace the wireless
4 Replace the battery.
5 Replace the base
computer. After working inside your
assembly.
card.
cover.
After working inside your
"Replacing the display
113