Table of Contents
Advertisement
NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your
inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Topics:
•
Procedure
•
Post-requisites
Procedure
1. Connect the camera cable to the camera.
2. Using the alignment post, place the camera on the display-back cover and snap it into place.
3. Slide the display cable into its slot on the display-back cover and press down the latch to secure the cable.
4. Adhere the tape on the display-cable connector.
5. Adhere the tape to secure the display cable to the display panel.
Post-requisites
1. Replace the
display
panel.
2. Replace the
display
assembly.
3. Replace the
wireless
card.
4. Replace the battery.
5. Replace the
base
cover.
computer. After working inside your computer, follow the instructions in
Replacing the camera
38
After working
www.dell.com/
Replacing the camera
71
Advertisement
Table of Contents
