Table of Contents
Advertisement
Table 13. System setup options—Advanced menu
Advanced
PowerNow! Enable
Virtualization
USB Emulation
USB Wake Support
SATA Operation
Adapter Warnings
Function Key Behavior
Battery Health
Miscellaneous Devices
USB Debug
BIOS Recovery from Hard Drive
Battery Charge Configuration
Advanced Battery Charge Configuration
SupportAssist System Resolution
Auto OS Recovery Threshold
80
System setup
Enables or disables the Intel(R) SpeedStep(tm) mode of the
processor.
Default: Enabled
Allows you to enable or disable the Virtualization technology.
Default: Enabled
Allows you to enable or disable the USB emulation feature.
This feature defines how the BIOS, in the absence of a USB-
aware operating system, handles USB devices. USB
emulation is always enabled during POST.
NOTE:
You cannot boot any type of USB device (floppy,
hard drive, or memory key) when this option is off.
Default: Enabled
Allows you to enable USB devices to wake the computer
from standby or to disable the USB wake support feature.
NOTE:
If USB PowerShare is enabled, a device
connected to the USB PowerShare connector may not
wake the computer.
Default: Disabled
Allows you to configure the operating mode of the integrated
SATA hard drive controller.
Default: AHCI
Allows you to choose if the computer should display warning
messages when you use AC adapters that are not supported
by your computer.
Default: Enabled
Allows you to set function key or multimedia key as the
default function key behavior.
Default: Multimedia key
Displays the battery health.
Enable or disable USB debug.
Default: Disabled
Enable or disable BIOS recovery from hard drive.
Default: Enabled
Set the battery charge settings with a preselected custom
charge start and stop.
Default: Adaptive
Enable Advance Battery Charge Configuration from the
beginning of the day to a specified work period.
Default: Disabled
Controls the automatic boot flow for SupportAssist System
Resolution Console and for the Dell OS Recovery tool.
Advertisement
Table of Contents
