Table of Contents
Advertisement
NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your
inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Topics:
•
Prerequisites
•
Procedure
Prerequisites
1. Remove the
base
cover.
2. Remove the battery.
3. Remove the
wireless
card.
Procedure
1. Remove the screw (M2x3) that secures the display-cable bracket to the system board.
2. Lift the display-cable bracket off the system board.
3. Peel off the tape to access the display cable.
4. Open the latch and disconnect the display cable.
48
Removing the display assembly
Removing the display assembly
computer. After working inside your computer, follow the instructions in
27
After working
www.dell.com/
Advertisement
Table of Contents
