Replacing the power and volume-buttons
NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your
inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Topics:
•
Procedure
•
Post-requisites
Procedure
1. Place the power and volume-buttons board into the slot on the palm-rest and keyboard assembly.
2. Adhere the tape that secures the power and volume-buttons board to the palm-rest and keyboard assembly.
3. Slide the power and volume-buttons board cable into the connector on the I/O board and close the latch to secure the
cable.
Post-requisites
1. Replace the battery.
2. Replace the
base
cover.
computer. After working inside your computer, follow the instructions in
Replacing the power and volume-buttons board
8
board
After working
www.dell.com/
19