Selecting Print Materials; Paper Type, Input Sources, And Capacities - Xerox WC PE120 Series User Manual

3.2
Paper Handling

Selecting Print Materials

You can print on a variety of print materials, such as plain paper,
envelopes, labels, transparencies, and etc.. Always use print
materials that meet the guidelines for use with this machine.
See "Paper Specifications" on page E.6. To get the best possible
print quality, use only high-quality copier-grade paper.
When you choose print materials, consider the following:
• Size: You can use any size paper that fits easily within the
paper adjusters of the paper tray.
• Weight: Your machine supports paper weights as follows:
- 16 ~ 24 lb (60 ~ 90 g/m
(Tray 1) and optional paper tray (Tray 2)
- 16 ~ 43 lb (60 ~ 163 g/m
• Brightness: Some papers are whiter than others and produce
sharper, more vibrant images.
• Surface smoothness: The smoothness of the paper affects
how crisp the printing looks on the paper.
C
: Using print materials that dose not conform to the
AUTION
specifications listed on page E.4 may cause problems that may
require service. This service is not covered by the warranty or
service agreements.

Paper Type, Input Sources, and Capacities

Paper Type
Plain paper
Envelopes
**
Labels
Transparencies
**
Card stock
* Maximum capacity may differ depending on media weight, thickness, and
environmental conditions.
**If you experience excessive jamming, load one sheet at a time through the
Bypass tray.
2
) bond for the standard paper tray
2
) bond for the Bypass tray
Input Source/Capacity
Optional
Tray 1
250
-
-
-
**
-
Bypass Tray
Tray 2
250 50
-
-
-
-
*
5
5
5
5