Stacking Order; Mixed Stacking; Additional Finishing Information - Xerox FREEFLOW 701P25032 System Manual

Finishing

Stacking order

Mixed stacking

Additional finishing information

4- 6
The user is able to specify the Output Set Stacking Order by the
combination of Output Order (1 to N or N to 1) and the Output
Delivery (Face Up/Face Down) selections.
These options can be set either at the Queue property level or at
the Job property level as part of the job ticket output option.
Mixed stacking allows all completed jobs with different finishing to
accumulate in the stacker until it is full or until the operator
empties it.
The types of finishing that can be mixed include stitching, binding,
and unfinished. The mixed stack can also include banner pages.
The stacker can hold between 12 and 18 subsets of different types
of finishing in the stacker before unloading.
Mixed stacking is enabled upon installation but can be disabled if
you choose to do so. If you wish to have it enabled at a later date,
a Xerox Service Representative must assist you.
The Xerox FreeFlow Print Server is unable to dual staple 3-hole
punched stock. If dual staple is selected when using pre-drilled
paper, improper registration will occur. Select to single staple the
job, or print on non-drilled stock and manually punch the holes
after finishing of dual staple is complete.
System Guide