Supported Tiff Tags - Xerox FREEFLOW 701P25032 System Manual

Printing

Supported TIFF tags

3- 1 0
different platforms. The imported TIFFs may print with a different
orientation relative to the PostScript image.
Prior to Print Server 3.1, the controller utilized a conversion tool
(TIFF to PostScript) to process and print TIFF files. A native TIFF
decomposer has now been implemented to directly process TIFF
files for printing. This improves the TIFF printing performance for
certain types of files. Decomposer level adjustments are also now
available for the TIFF decomposer at the Queue level.
NOTE: Multipage TIFF files are supported. Single TIFF files can
contain multiple TIFF images to be processed and printed.
Below is a list of the TIFF tags supported by the Print Server
software.
Compression
– Default = 1
– The Print Server supports values of 1 (uncompressed), 2
(CCITT Modified Huffman RLE, 32773 (PackBits), 3 (CCITT
Group 3), and 4 (CCITT Group 4).
T4 Option
– Default = 0
– This is used to determine CCITT Group 3 one or two
dimensional coding.
Fill Order
– Default = 1
– The Print Server supports values of 1 and 2.
Image Width and Image Length
– Default = none; values must be supplied.
Orientation
– Default = 1
– The Print Server supports values of 1, 3, 6, and 8. Values of 2,
4, 5, and 7 are treated as if they were 1, 3, 6, and 8
respectively.
Photometric Interpretation
– Default = none; value must be supplied.
– The Print Server supports bi-level values of 0 and 1 only.
Resolution Units
– Default = 2
– The Print Server supports values of 2 (inches) and 3
(centimeters)
Rows Per Strip
System Guide