Headlamp High/Low Beam; Headlamp Range Adjustment - HOLDEN MY18 TJ Trax Owner's Manual

Headlamp high/low beam

To activate high beam:
1. Turn the headlamps on.
2. Push the lever forwards.
The high beam indicator lamp
$ illuminates on the instrument
cluster.
To return to low beam:
1. Push the lever again or pull the
lever rearward.
Warning
Always switch the headlamps
to low beam when vehicles are
approaching or when following
another vehicle.
To flash the high beam lamps:
1. Pull the lever towards the rear of
the vehicle and release.
The lamps stay on for as long as
the lever is held.
Lighting
Headlamp range
adjustment
Adjust the headlamp range
according to vehicle load, to ensure
illumination of the road ahead.
Press 9 to withdraw the switch,
rotate to the recommended position
and then press it back in place:
0: Front seats occupied
1: All seats occupied
2: All seats occupied and load
compartment laden
3: Driver's seat occupied and load
compartment laden
91