188
Vehicle care
Bulb replacement
Contact a trained service technician
if unsure about the bulb replacement
process.
When replacing bulbs:
•
Turn the ignition off and remove
the key.
•
Turn off related switches.
•
Fit bulbs of the specified
wattage only.
•
Do not touch bulbs or reflectors
with bare hands.
•
Clean stained bulbs with
methylated spirits.
Bulbs to be changed by
a Holden Dealer
•
Side turn signal lamps.
•
Centre High Mounted Stop Lamp
(CHMSL).
•
Fog lamps.
•
LED Daytime running lamps.
•
LED Tail lamps.
Caution
Condensation may temporarily
appear on the inside of exterior
lamp lenses after rain or washing
the vehicle. Condensation occurs
when there is a temperature
difference between the inside and
outside of the lamp allowing a
fine mist on the inside surface of
the lamp lens. This condensation
will disappear when the vehicle is
in a dry environment or the lamp
is on. If water does collect in the
lamp contact a Holden Dealer.
Headlamps
1. Low and high beam headlamp
2. Front turn signal lamp