Rear Vision Camera (Rvc) - HOLDEN MY18 TJ Trax Owner's Manual

162 Driving and operating
Fault
If a fault occurs, r illuminates:
• Move the vehicle with care.
• Check and clean the sensors.
Notes on operation
• The alarm tones differ depending
on the objects detected.
• If the sensors receive other
ultrasonic signals e.g. metallic
sounds or exhaust brake noise
from heavy commercial vehicles,
the system may not work
properly.
• The system may not activate
if the sensors are frozen or
covered with dirt.
• Clean dirty sensors with a soft
sponge and clean water.
• Do not push or scratch the
surface of the sensors.
• Do not hit or direct high pressure
water directly at the sensors as
they may be damaged.
• The system may not recognise
sharp objects, thick clothes or
other materials which absorb
ultrasonic waves.
• The system may not operate
correctly when the vehicle is
driven over uneven surfaces.
Rear Vision Camera
(RVC)
The rear vision camera (RVC)
system is designed to assist the
driver when reversing by displaying
a view of the area behind the
vehicle.
The RVC cannot display objects:
• Close to the corners of the
vehicle.
• Forward of the camera.
• Higher than the camera.
Note
• The distance of the objects seen
on the display differs from the
actual distance.
• The area displayed depends on
the road condition and vehicle
orientation.