Cruise Control - HOLDEN MY18 TJ Trax Owner's Manual

Table of Contents

Advertisement

Cruise control

The cruise control:
Maintains the vehicle's speed
without pressure on the
accelerator pedal.
Will only operate at speeds
above approximately 40 km/h.
Controls are located on the
passenger's side of the steering
wheel.
Warning
Do not use the cruise control
when road or driving conditions
require varying speeds. A
consistent speed isn't practical
in heavy, varying traffic or on
winding, slippery or rough roads.
The cruise control does not apply
the vehicle's brakes. Therefore
the vehicle may gain speed when
going down steep hills.
When climbing steep hills it is
possible for the vehicle to lose
speed. You may need to switch
off the cruise control and use the
accelerator pedal.
Driving and operating
Setting cruise control
1. Press m.
m illuminates white.
2. Accelerate to the desired speed
(above 40 km/h).
3. Rotate the wheel towards SET/-
and release.
m illuminates green.
4. Take your foot off the accelerator
pedal.
Increasing set speed
1. Rotate the wheel towards RES/+
and hold it.
The vehicle will accelerate.
2. Release the wheel at the desired
speed.
3. Rotate the wheel towards RES/+
and release it immediately.
The speed will increase by
1-2 km/h.
159

Advertisement

Table of Contents
loading

Table of Contents