Software Version; Showroom Programme; Factory Default - Miele H 7464 BP Operating And Installation Instructions

Settings
Running a RemoteUpdate
Information about the content and
scope of an update will be provided in
the Miele@mobile app.
A message will appear in your oven
display if a software update is available.
You can install the update immediately
or postpone this until later. When the
oven is switched on again, you will be
reminded about the update.
Deactivate RemoteUpdate if you do not
want to install the update.
The update may take several minutes.
Please note the following information
about the RemoteUpdate function:
- You will only receive a message when
an update is available.
- Once an update has been installed, it
cannot be undone.
- Do not switch the oven off during the
update. Otherwise, the update will be
aborted and will not be installed.
- Some software updates can only be
carried out by your Miele dealer.

Software version

The software version is intended for
your Miele dealer. You do not need this
information for domestic use.
40

Showroom programme

This function enables the oven to be
demonstrated in showrooms without
heating up. Do not activate this setting
for domestic use.
Demo mode
If you have demo mode activated,
Demo mode is activated. The appliance will
not heat up will appear when you
switch the oven on.
- On
Touch the OK sensor control for at
least 4 seconds to activate demo
mode.
- Off
Touch the OK sensor control for at
least 4 seconds to deactivate demo
mode. You can use the oven as
normal.

Factory default

- Appliance settings
Any settings that have been altered
will be reset to the factory default
settings.
- User programmes
All User programmes will be deleted.
- Recommended temperatures
Any recommended temperatures that
have been changed will be reset to
the factory default settings.