Miele H 7464 BP Operating And Installation Instructions page 24

Features
Fitting and removing FlexiClip
runners

Danger of injury caused by hot
surfaces.
The oven gets hot during operation.
You could burn yourself on the
heating elements, oven compartment
or accessories.
Allow the heating elements, oven
compartment and the accessories to
cool before fitting or removing the
FlexiClip runners.
The FlexiClip runners are fitted in
between the two rails that make up a
shelf level.
The FlexiClip runner with the Miele logo
should be fitted on the right.
When fitting or removing the FlexiClip
runners, do not extend them.
 Hook the FlexiClip runner onto the
front of the lower rail of a shelf level
(1.) and then push it along the rail into
the oven compartment (2.).
24
 Then secure the FlexiClip runner to
the lower rail of the shelf level (3.).
If the FlexiClip runners are difficult to
pull out after fitting, pull firmly on them
once to release them.
To remove a FlexiClip runner, proceed
as follows:
 Push the FlexiClip runner in all the
way.
 Remove the FlexiClip runner by
raising it at the front (1.) then pulling it
forwards along the rail of the shelf
level and out (2.).