Miele H 7464 BP Operating And Installation Instructions page 23

Baking tray, universal tray and rack
with non-tip notches
Baking tray HBB 71:
Universal tray HUBB 71:
Rack HBBR 72:
These accessories are inserted into the
oven between the two rails of a shelf in
the side runner.
Always place the rack with the loading
surface in the lower position.
These accessories have non-tip safety
notches fitted in the middle of their
short sides. The non-tip safety notches
prevent the trays from being pulled out
completely from the side runners when
you only wish to pull accessories out
partially.
If you are using the universal tray with
the rack on top, insert the tray between
the rails of a shelf of the side runners
and the rack will automatically slide in
above them.
FlexiClip runners HFC 72
You can use the FlexiClip runners on
shelf levels 1–4.
Push the FlexiClip runners right into
the oven compartment before placing
accessories on them.
The accessories will then
automatically sit securely in between
the stoppers at either end of each
runner and be prevented from sliding
off.
The FlexiClip runners can support a
maximum load of 15 kg.
Features
23