Miele H 7464 BP Operating And Installation Instructions page 71

 Insert the plug of the food probe into
the socket until you feel it engage.
 Close the door.
 Select the function or automatic
programme.
 Set the temperature and the core
temperature if necessary.
The core temperatures cannot be
changed for the automatic
programmes.
Follow the instructions on the display.
The cooking programme is brought to
an end as soon as the core temperature
is reached.

Risk of injury caused by hot
surfaces.
The food probe can get hot. You
could burn yourself on it.
Wear oven gloves when removing
the food probe from its socket.
Delaying the start of a cooking
programme with food probe
You can set the cooking process to
start at a later time.
 Once you have selected a function,
touch the  sensor control.
 Select
Start at .
The finish time can be calculated
approximately because the duration of
a cooking process is about the same,
whether or not the food probe is used.
You cannot set
Duration
because the total cooking duration is
determined by when the set core
temperature is reached.
Time left display
If the temperature set for a cooking
programme is above 140 °C, the
estimated time left will appear in the
display.
The time left is calculated from the
cooking temperature selected, the set
core temperature, and the progress of
the core temperature as it rises.
The time left first shown is an estimate.
As the cooking process continues, the
time left is revised continuously, and a
more accurate figure is shown.
The time left will be deleted if the
cooking or core temperature is changed
or if a different function is selected. If
the door is opened for a longer time,
the time left will be recalculated.
Roasting
and
Finish at
71