You can create and save up to 20 User
programmes.
- You can combine up to 10 cooking
stages to accurately programme your
favourite or most frequently used
recipes. In each cooking stage, you
can select settings such as the
function, temperature and cooking
duration or core temperature.
- You can specify the shelf level(s) for
the food.
- You can enter the name of the
programme for your recipe.
When you call up and start your
programme again, it will run
automatically.
There are different ways of creating a
User programme:
- At the end of an automatic
programme, save it as a User
programme.
- Save a cooking programme after
running it with a set cooking duration.
Then enter a programme name.
User programmes
Creating User programmes
Select
Further
.
Select
User programmes
Select
Create programme
You can now specify the settings for the
first cooking stage.
Follow the instructions in the display:
Select and confirm the desired
settings.
If you select the
complete the first cooking stage. Use
Add cooking stage
cooking stage where you set a
cooking duration. Only then can you
save or start the programme.
Select
Finish cooking stage
The settings for the first cooking stage
have now been set.
You can add more cooking stages, for
example, if you want to add another
cooking function to follow on from the
first.
If additional cooking stages are
required, select
proceed as for the first cooking
stage.
When you have finished setting all the
cooking stages, select
level
.
Select the desired level(s).
Confirm with OK.
If you want to check the settings or to
change them at a later date, select the
cooking stage in question.
.
.
Pre-heat
function, first
to then add another
.
Add cooking stage
Set the shelf
and
63