Cleaning The Second Transport And Fusing Areas - Xerox DocuColor 7000 Operator's Manual

6. M a i nt en a nc e

Cleaning the Second Transport and Fusing areas

6- 1 0
Use the following procedure if your output prints have dirt or
contamination on them or if you receive multiple paper jams in
Area 4.
NOTE: It is recommended that you perform this procedure one
time per day, preferably at the start of the day before the digital
press is switched on and the fuser is hot.
WARNING: If the digital press is switched on and the fuser is hot,
be sure to switch off the digital press power and allow 15 minutes
for the fuser to cool before performing this procedure.
1. Open the front doors.
Do c u Co l or 8 00 0 /7 00 0 O pe r a to r M a nu a l
Front doors