Print Rates - Xerox DocuColor 7000 Operator's Manual

:
Single Paper
Substrate
1 Sided
80 ppm
2
60 - 80 g/m
80 ppm
2
81 - 105 g/m
80 ppm
2
106 - 135 g/m
60 ppm
2
136 - 186 g/m
60 ppm
2
187 - 220 g/m
40 ppm
2
221 - 300 g/m
Transparencies 30 ppm
Do c u Co lo r 80 0 0/ 70 0 0 O p er a to r Ma n ua l

Print Rates

Use the Productivity Setting in the Tools Mode to optimize the
throughput speed for the weight of the paper you are using.
• Selecting Single Paper Weight sets the Fuser temperature to
o
160 C, which optimizes the throughput speed for light and
heavy weight papers, according to the weight range that is set
in the paper tray, and uses less power.
• Selecting Mixed Paper Weight sets the Fuser temperature to
o
175 C, which optimizes the throughput speed for mixed paper
weights from different paper trays, and uses more power.
Refer to the System Administrator Guide for the procedure to
change the setting.
The following chart illustrates the print speeds for the two modes
using 8.5x11" or A4 paper fed LEF.
DocuColor 8000/7000
DocuColor 8000
Mixed Paper
Weight Weight
2 Sided 1 Sided
40 ppm 80 ppm
40 ppm 80 ppm
40 ppm 60 ppm
30 ppm 60 ppm
30 ppm 40 ppm
------- 40 ppm
------- 30 ppm
*ppm = prints per minute
DocuColor 7000
Single Paper
Weight
2 Sided 1 Sided 2 Sided
40 ppm 70 ppm 35 ppm
40 ppm 70 ppm 35 ppm
30 ppm 70 ppm 35 ppm
30 ppm 50 ppm 25 ppm
20 ppm 50 ppm 25 ppm
------ 35 ppm -------
------ 30 ppm -------
5. Te c hn i c al Da ta
Mixed Paper
Weight
1 Sided 2 Sided
70 ppm 35 ppm
70 ppm 35 ppm
60 ppm 30 ppm
50 ppm 25 ppm
40 ppm 20 ppm
35 ppm ------
30 ppm ------
5-5