1. O ve r v i e w
Part
Control Panel
Dry Ink/Toner Compartment
Offset Catch Tray (OCT)
Right/Left Front Doors
Exit Module
1- 4
Allows keypad selection of features. Refer to the Control Panel
section in this chapter.
Contains the Dry Ink/Toner cartridges. The cartridge colors from left to
right, are black, cyan, magenta, and yellow. Refer to the Maintenance
Chapter of this manual for instructions on changing the cartridges.
Receives completed print job. Sets are offset for easy separation.
Maximum capacity is 500 sheets of 24 lb. (90 g/m
Houses the image transfer system for simplex and duplex printing.
Open to clear jams in the paper path in the Printing Module and at the
Fuser. Follow the instructions precisely for clearing a jam in the Fuser.
WARNING: The Fuser is extremely hot and will cause injury if
jam clearing instructions are not followed.
Contains the decurler and the inverter. The decurler removes any curl
from the printed page. The inverter is used when duplexing or face
down output is selected.
Do c u Co l or 8 00 0 /7 00 0 O pe r a to r M a nu a l
Description
2
) paper.