Jam Clearance With 2-Sided Printing - Xerox DocuColor 7000 Operator's Manual

4. P r o b le m s o l v i ng
4- 1 4

Jam clearance with 2-sided printing

When printing 2-Sided output, the UI will direct you to clear the
following areas if a jam occurs.
6
CAUTION: Be careful when clearing jams in the Fuser area, The
Fuser is extremely hot and will cause injury.
1. Lift handles 5 and 6 and clear any paper in the areas.
CAUTION:Paper can rip if not pushed back before removing it
from under the lip of this area.
2. Push the paper back until you see the front edge, then remove
the paper.
3. Reposition handles 5 and 6 by closing firmly.
4. Close the Right and Left Front Doors.
5. Follow the instructions on the UI to restart your print job.
Do c u Co l or 8 00 0 /7 00 0 O pe r a to r M a nu a l
5