Raise the unit into place
Do c u Co lo r 80 0 0/ 70 0 0 O p er a to r Ma n ua l
7. Remove the new web unit from the box and the protective
covering.
8. Hold the web assembly with both hands and line up the tabs
on both sides of the bottom of the assembly with the slides on
both sides of the Fuser area. Slide the assembly in until it is
firmly in place.
9. Raise the unit to the upright position and push up the two white
levers.
6. M ai n te n an c e
Raise the white levers
6-33