Xerox DocuColor 7000 Operator's Manual page 135

Problem
Excessive paper curl
(continued).
It is difficult to perform
secondary operations on the
output prints, such as writing
on them or using adhesives.
Do c u Co lo r 80 0 0/ 70 0 0 O p er a to r Ma n ua l
Paper curl may be a result of an attempt to print on thicker paper or on
paper stock that is less sensitive to moisture.
This problem is caused by the oil used in the fusing process. The problem
can be reduced or eliminated by setting the prints aside for one or two
hours before performing a secondary operation on them. Rubbing the print
surface with a soft, clean cloth or eraser may also help.
Suggested Solution
4 . P r o b le m s o l vi n g
4-5