Xerox DocuColor 7000 Operator's Manual page 86

3. A c c e s s or ie s
Name
5 Wait light Blinks when the Stacker Tray is moving up or down.
6 Fault code Displays a code when a fault occurs in the HCS80. Refer to the HCS80 fault code
display table located in the Problem Solving section of this chapter.
7 Top tray jam Blinks when there is a jam.
area
8 Bypass jam Blinks when there is a jam.
area
9 Stacker tray Blinks when there is a jam or the door is open.
jam area
Keypad Used by the service representative for diagnostics (not shown). The keypad is
located on the front right of the control panel.
3- 1 2
Function
Do c u Co l or 8 00 0 /7 00 0 O pe r a to r M a nu a l