Data; Destination - Xerox 721P85530 Description

SPECIFYING DYNAMIC JOB DESCRIPTOR ENTRIES (DJDES)

DATA

DESTINATION

8-36
This parameter specifies the location and length of printable data
within an input record. It takes effect at the next record following a
DJDE END parameter.
DATA = option(s)
Syntax
Options Table 8-21 lists the parameter option(s) and definition(s).
Table 8-25. DATA parameter option(s) and definition(s)
Option(s)
( pdo , length ) This option has the following components:
This parameter determines the delivery destination of paper.
Syntax DESTINATION = option(s)
Options Table 8-22 lists the parameter option(s) and definition(s).
Table 8-26. DESTINATION parameter option(s) and
Option(s)
BIN
TRAY
EXPORT
Definition(s)
•
pdo
(Print data offset) is the number of bytes
between the start of the user portion of the
logical record and the first character of the
record to be printed.
•
length
Specifies the maximum length of printable data
within each logical record. For offline systems
the default is (1,132). For online systems the
default is (0,150). For HOST=RSX11(FLX), the
DATA parameter must be included in the user's
JSL since the default pdo value causes the first
data byte to be skipped.
The default is (1,132) offline.
The default is (0,150) online.
definition(s)
Definition(s)
Specifies delivery to the currently active bin.
Specifies delivery to the sample tray. Transparencies
should only be sent to the sample tray. Use caution
when selecting the sample tray because of its limited
capacity.
Specifies that sheets be sent to the bypass transport.
Export is honored only if SELECT=AUTO is specified
by the operator.
XEROX DOCUPRINT 180 LPS PDL REFERENCE